3DLevelScanner for High Temperatures
Model: 3DLS HT
The 3DLevelScanner HT measures inventory level and estimates volume in storage silos containing challenging materials such as clinker, alumina, frac sand and fly ash. This model of the 3DLevelScanner (aka 3D Solids Scanner) has an operating temperature range up to 356°F (180°C) to accommodate higher temperatures that may be present when material that has been heated in the production process is conveyed into storage. The 3DLevelScanner HT is ideal for use in the cement, aluminum, mining and power industries where there are multiple challenges such as dust or high humidity as well as in very large silos where the material surface in the bin may be uneven and difficult to measure.
- Measuring the level and estimating the volume in storage silos containing high temperature materials
- Appropriate for silos experiencing high dust and humidity
- Large silos with uneven and difficult to measure material surface
- Challenging materials such as clinker, alumina, frac sand and fly ash
- Industries including cement, power, aluminum and frac sand
- Operating temperature range of up to 356°F (180°C)
- Continuous and non-contact measurement
- Measures uneven powder or solid material surfaces
- Detects cone up, cone down and sidewall buildup
- Provides minimum, maximum and average distances
- Performs in extreme levels of dust
- Calculates highly accurate bin volume
- Communications include 4-20/HART, Modbus RTU, TCP/IP and RS-485
- Measuring range up to 200 feet
- Self-cleaning with minimal maintenance
Preferred Applications: Powders and solids
Measuring Range: 200 feet (61 meters)
Process Temperatures: -40°to +356°F (-40°to +180°C)
High Temp Process Pressure: -0.2 – 3 bar (-2.9 to 14.5 psi)
Signal Output: 4-wire 4 - 20 mA/HART/RS-485/Modbus
Emitting Frequency: 3 KHz to 10 KHz
Supply Voltage: 20 to 32 VDC
Power Consumption: Max 1.5 W @ 24 VDC
Hazardous Locations: CFM Intrinsically Safe Class I, II, Division I, Groups C, D, E, F, G (US & Canada)
