High Temp Vibrating Rod
Model: SHT-120 and SHT-140
The SHT or Super High Temperature vibrating rod series is built specifically for higher process temperatures up to 482°F (250°C). It features a standard insulation tube that insulates the electronics from excessive heat. It has a standard insertion length of 7.24 inches for both top and side mount applications. It can be extended from 13 inches up to 13 feet using a rigid pipe extension for top mount applications. It has three sensitivity settings, does not require calibration, and can be used to detect extremely light, fluffy materials. SHT vibrating rods feature BinMaster’s unique stainless steel single-rod probe design that prevents bridging and buildup of material on the sensor.
- Suitable for high and low level indication, or plugged chute detection
- Built specifically for higher process temperatures up to 482°F (250°C)
- Detects extremely light, fluffy materials and materials with low dielectric constants
- Material densities from less than 1.25 lb./cu. ft.
- Carbon black, plastics, fly ash, feed, seed, grain, food, chemicals and many other materials
- Single stainless steel rod design
- No calibration required
- Wear and maintenance free
- No moving parts
- High and low level fail-safe
- Three sensitivity adjustments
- Universal power supply
- Self-cleaning sensor
- 1-1/2” NPT mounting
- Remote electronics available
- Insertion length from 7.37” to 13’
- Lagged design to locate electronics away from heat source
Power Requirements: Wide range 20-250V AC/DC
Power Consumption: 3 VA
Relay: 1 potential-free change-over contact DPDT
Time Delay: 1 second from stop of vibration, 2 to 5 seconds for start of vibration
Ambient Temp: -4°F to +150°F (-40°C to +65°C)
Process Temp: To 482°F (250°C)
Pressure: 145 psi
Wiring Cable: 1/2”
Mounting: 1-1/2” NPT
Enclosure: Die cast aluminum, NEMA 4, 5 & 12
Probe: 304 stainless steel, (SHT-120 7.37” insertion length, SHT-140 14” to 13’ insertion length)
Material Density: From 1.25 lb./cu. ft.
